Shift Indicator Cable
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Mercury Grand Marquis, 1997 Mercury Cougar, 1997 Lincoln Town Car, 1997 Lincoln Mark VIII, and 1997 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
- Remove instrument lower trim panel. Place shift control selector in DRIVE position. Hold shift lever against rear overdrive stop with a constant force of about 3 lbs. (1.4 kg).
- Rotate thumbwheel located on right side of steering column, to align indicator with letter "D" on analog instrument cluster. For digital instrument cluster, align indicator so both calibration dots change from Red to White.
- Cycle transmission through all gears to ensure proper operation. Remove pressure from shift control selector and install instrument lower trim panel.