Diagnostic Monitor: Installation
WARNING: This page is about a different car, the 1997 Mercury Grand Marquis, 1997 Lincoln Town Car, and 1997 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Connect electrical connector to passenger-side air bag module and position passenger-side air bag module in instrument panel. Install upper retaining screws. Install lower module retaining screws and torque to specifications. See TORQUE SPECIFICATIONS .
- Return glove compartment to original position. Install instrument panel upper moulding by snapping into place on the instrument panel.
- Reconnect battery ground cable. Ensure system is operating properly. See SYSTEM OPERATION CHECK .