LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Analog >> Component Testing >> Coolant Temperature Gauge Test

Coolant Temperature Gauge Test

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Using fused jumper wire, apply battery voltage to "+" terminal on temperature gauge. Connect "-" terminal on gauge to ground.
  2. Connect one lead of Gauge System Tester (014-R1063) to terminal "T" on gauge. Connect other tester lead to "-" terminal on gauge.
  3. Set tester to resistance specified in illustration. See Fig 1 . If temperature gauge indicates as specified, go to appropriate symptom test. See TESTING (PINPOINT TESTS)  . Replace temperature gauge if it does not indicate as specified.
Fig 1: Testing Coolant Temperature Gauge
G94F32933Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals