Power Window Motor: Installation
WARNING: This page is about a different car, the 1997 Mercury Sable and 1997 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble window drive motor to regulator assembly. Tighten motor-to-regulator bolts until snug (DO NOT fully tighten). Connect wiring to motor.
- Connect negative battery cable. Operate window to ensure proper gear engagement. Tighten motor-to-regulator bolts to 53-89 INCH lbs. (6-10 N.m). Install door panel and trim.