LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis >> Retrieving Trouble Codes >> Using Super Star II Tester

Using Super Star II Tester

  1. Turn ignition off. Locate ABS Data Link Connector (DLC) on engine compartment power distribution box. Following manufacturer's instructions, connect Super Star II Tester (007-0041B). Turn tester on. Depress TEST button and latch down. Ensure tester is in slow mode.
  2. Turn ignition switch to RUN position with engine off. ANTI-LOCK warning light will begin to flash Diagnostic Trouble Codes (DTC). If any DTCs have been detected, each code will be flashed out only once after entering diagnostic mode. See DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION  table.
  3. If no DTCs are stored, DTC 12 will flash. After all DTCs have been flashed, ANTI-LOCK warning light will remain on until ignition switch is cycled.
scientia non olet · About LEMON Manuals