LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Explorer 4D Utility, 5.0 P, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls - Tests W/Codes) >> Drive Cycles >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle

Comprehensive Component Monitor Repair Verification Drive Cycle

WARNING: This page is about a different car, the 1997 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.

  1. Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and go through the entire OBD II drive cycle until the comprehensive component monitor shows the completion status by clearing the code P1000 on the scan tool.
  3. If the entire OBD II drive cycle has been performed and the comprehensive component monitor check has not completed, rerun quick test. See QUICK TEST .

scientia non olet · About LEMON Manuals