Front Wiper Motor
WARNING: This page is about a different car, the 1997 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
- Disengage wiper arm linkage from motor. Disconnect wiper motor connector. Connect a jumper wire between Black wire terminal of wiper motor and ground.
- Connect a fused jumper between positive battery terminal and Blue/White wire terminal of wiper motor. Wiper motor should operate at low speed. Disconnect jumper from Blue/White wire terminal and connect it to Red wire terminal of wiper motor.
- Motor should operate at high speed. If wiper motor does not operate as specified, replace motor.