LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Escort Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Analog >> System Testing >> Test M - Improper Abs Warning Operation

Test M - Improper Abs Warning Operation

  1. Turn ignition off. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Disconnect instrument cluster electrical connector C2. See Figure . Measure resistance between ground and instrument cluster harness connector C2, terminal No. 1 (Yellow/Red wire). Resistance should be greater than 10 k/ohms. If resistance is greater than 10 k/ohms, go to next step. If resistance is less than 10 k/ohms, see BRAKE SYSTEM - ANTI-LOCK article in BRAKES section.
  2. Visually inspect instrument cluster printed circuit for damage, cracks or hot spots. If instrument cluster printed circuit is okay, replace ABS warning indicator bulb. If instrument cluster printed circuit is damaged, replace printed circuit and gauge contact clips. See PRINTED CIRCUIT  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals