LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Contour Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul - MTX-75 5-Speed >> Component Disassembly & Reassembly >> Input Shaft >> Disassembly

Input Shaft: Disassembly

  1. Using a press and split clamp plate, remove tapered roller rear bearing from 5th gear end of shaft. Remove 5th gear snap ring. Place bearing puller behind 5th gear and press 5th gear from shaft. Remove 4th gear, needle bearing and synchronizer blocker ring from shaft.
  2. Remove snap ring and 3rd-4th gear synchronizer assembly. See Figure. Remove 3rd gear, needle bearing and synchronizer blocker ring from shaft. Using a press and split clamp plate, remove tapered roller rear bearing from 1st gear end of shaft.
scientia non olet · About LEMON Manuals