Power Window Motor: Installation
WARNING: This page is about a different car, the 1997 Mercury Mountaineer and 1997 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Position motor to regulator and install screws. Do not tighten. Connect wiring and check glass to ensure gear engagement. After gears engage, tighten 3 attaching nuts to 50-80 INCH lbs. (5.6-9.6 N.m). To complete installation, reverse removal procedure.
Position motor to regulator and install screws. Do not tighten. Connect wiring and check glass to ensure gear engagement. After gears engage, tighten 2 attaching nuts to 50-80 INCH lbs. (5.6-9.6 N.m). To complete installation, reverse removal procedure.