LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Wiper System & Washer System) >> System Testing >> Front Wipers Inoperative At High Speed

Front Wipers Inoperative At High Speed

WARNING: This page is about a different car, the 1997 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform FRONT WIPER SWITCH CONTINUITY TEST. Replace multifunction switch as necessary. If switch is okay, go to next step.
  2. Ensure ignition is off. Disconnect wiper motor connector. Turn ignition on. Measure voltage between ground and Red wire at wiper motor connector. If battery voltage exists, replace wiper motor. If battery voltage does not exist, repair Red wire as necessary.