Front Wiper Switch
WARNING: This page is about a different car, the 1997 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
Wiper switch is incorporated into multifunction switch on steering column. Turn ignition off. Disconnect multifunction switch 14-pin connector. Using an ohmmeter, check for continuity between switch terminals with switch in specified positions. See FRONT WIPER SWITCH CONTINUITY TABLE. See Fig 1 . Replace multifunction switch as necessary.
FRONT WIPER SWITCH CONTINUITY
| Position | Terminals No. (Wire Color) |
|---|---|
| Off | 4 (BLU/BLK) & 13 (BLU/WHT) |
| Interval | 4 (BLU/BLK) & 13 (BLU/WHT) |
| Low Speed | 11 (BLU & 13 (BLU/WHT) |
| High Speed | 11 (BLU) & 12 (RED) |
| Mist | 11 (BLU) & 12 (RED) |
| Wash | 11 (BLU) & 5 (BLU/ORG) |