Anti-Lock Actuator
Disconnect hydraulic anti-lock actuator assembly connector. Using an ohmmeter, measure resistance across specified terminals. See ANTI-LOCK ACTUATOR CONNECTOR TEST table. See Fig 1 . If measured resistance between terminal pairs is approximately 3 ohms, go to PINPOINT TESTS. If measured resistance is not as specified, replace hydraulic anti-lock actuator assembly.
ANTI-LOCK ACTUATOR CONNECTOR TEST
| Terminals No. | Wire Colors |
|---|---|
| 1 & 3 | Yellow/White & Yellow/Green |
| 5 & 7 | Yellow/White & Blue/Orange |
| 2 & 4 | Yellow/White & Brown |
| 6 & 8 | Yellow/White & Black/Yellow |