LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Windstar LX, 3.0 U >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls - Remove/Install/Overhaul - 3.8L) >> Ignition System >> Powertrain Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect battery ground cable. Remove cowl top vent panel. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

PCM LOCATIONS

Model Location
Windstar Cowl Area (Passenger side)
scientia non olet · About LEMON Manuals