LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Windstar Base, 3.8 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Windows System) >> Removal & Installation >> Window Motor >> Installation

Window Motor: Installation

WARNING: This page is about a different car, the 1997 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install NEW window regulator electric-drive. Tighten retaining screws to 53-98 INCH lbs. (6-10 N.m). Place duct tape over drilled holes. Connect window regulator wiring. Connect negative battery cable.
  2. Remove window glass prop. Check window glass operation. Ensure drain holes are open. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals