LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Probe GT, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments - 2.5L >> Adjustments >> Throttle Position (TP) Sensor

Throttle Position (TP) Sensor

  1. Turn ignition off. Disconnect PCM wiring harness connector. Inspect terminals for damage and repair if necessary. Connect Breakout Box (014-00322) to PCM. Turn ignition on. Measure voltage between test pin No. 47 and ground.
  2. Voltage should be 0.1-1.1 volts with throttle fully closed and 3.1-4.4 volts with throttle fully open. If voltage is not within specification, loosen TP sensor screws. Adjust TP sensor until voltage is within specification.
scientia non olet · About LEMON Manuals