LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Probe Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Component Testing >> Wiper Motor

Wiper Motor

  1. Disengage wiper arm linkage from motor. Disconnect wiper motor connector. Connect a jumper wire between Black wire terminal of wiper motor and ground.
  2. Connect a fused jumper between positive battery terminal and Blue/White wire terminal of wiper motor. Wiper motor should run at low speed. Disconnect jumper from Blue/White wire terminal, and connect it to Red wire terminal of wiper motor.
  3. Motor should run at high speed. If wiper motor does not operate as specified, replace motor.
scientia non olet · About LEMON Manuals