LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Bronco 5.8 H >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Motor >> Installation

Window Motor: Installation

  1. To install, reverse removal procedure. Tighten retaining screws to 53-80 INCH lbs. (6-9 N.m). Remove prop holding window glass up. Install 2 pieces of waterproof pressure sensitive tape over drilled holes.
  2. Reconnect window motor connector. Reconnect negative battery cable. Test window operation. Ensure door drain holes are open and reinstall door trim panel.
scientia non olet · About LEMON Manuals