LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Windstar LX >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis >> System PRECHECKS >> Electrical System Precheck

Electrical System Precheck

  1. Verify following connectors are properly connected and free from contaminants and corrosion:
    • 24-pin Anti-Lock Brake Control Module (ABCM) connector
    • 2-pin power and ground connector
    • 2-pin motor connector
    • 2-pin speed sensor connectors (check 4 connectors)
  2. Open power distribution box and verify 60-amp fuse is seated and okay. Open central fuse panel under drivers side dash and verify Red brake light relay is seated and okay. Verify system ground eyelet located behind left headlight is firmly attached and no corrosion is present. Repair or replace components as necessary. If all components are okay or after repairing components, perform CHECKING RED BRAKE AND YELLOW ABS WARNING LIGHT SEQUENCE  .
scientia non olet · About LEMON Manuals