LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> RV Cutaway 7.3 F >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Single Switch, Power Window

Single Switch, Power Window

  1. Remove window regulator control switch from the vehicle. See WINDOW REGULATOR  under REMOVAL & INSTALLATION. The raised portion of the switch knob should face right exposing the five terminals.
  2. With the window regulator control switch in the neutral position, there should be continuity between terminals 1 and 2, and terminals 3 and 4. Terminal 5 should be disconnected from all other terminals. See Fig 1 .
  3. When the raised portion of the switch rocker knob is pushed, closing windows, there should be continuity between terminals 1 and 5, and terminals 3 and 4. Terminal 2 should be disconnected from all other terminals.
  4. When the depressed portion of the switch rocker knob is pushed, opening the windows, there should be continuity between terminals 1 and 2, and terminals 4 and 5. Terminal 3 should be disconnected from all other terminals.
  5. If the window regulator control switch does not test as stated, replace window regulator control switch.
Fig 1: Single Switch Terminals
G00088711Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals