Pinpoint Testing
NOTE:
See ANTI-THEFT DIAGNOSIS TABLE
to determine testing according to symptom.
Before performing any tests on anti-theft system, check the following items to eliminate common problems. Correct any obvious defects before proceeding.
- Hood/liftgate properly aligned.
- Door locks not binding.
- Fuses are okay.
- Loose or corroded connections.
- Damaged wiring.
- Damaged control module.
- Horn, headlights, hazard flashers, interior lights, power door locks, and remote entry systems are okay.
ANTI-THEFT DIAGNOSIS
| Symptom | Pinpoint Test |
|---|---|
| System Does Not Arm Properly | Test A |
| System Does Not Activate Properly | Test B |
| System Does Not Disarm Properly | Test C |
| Engine Will Not Crank | Test D |
| Alarm Light Is Always On | Test E |
| Alarm Light Does Not Work | Test F |
| Horn, Headlights & Parking Lights Always On | Test G |
| System Activates Falsely | Test H |
| Ignition Switch Lock Cylinder Sensor Inoperative | Test J |