LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 4R70W Automatic Transmission >> Torque Converter >> Stator Interference Check >> Stator-To-Impeller Interference Check

Stator-To-Impeller Interference Check

  1. Position stator support shaft on bench with spline end pointing up. Mount converter vertically onto shaft so support shaft splines engage one-way clutch splines. See Fig 1 .
  2. While holding support shaft stationary, rotate converter counterclockwise. Converter should rotate freely without interference or scraping within assembly. Should interference or a scraping condition within converter exist or if converter does not rotate freely, replace converter unit.
Fig 1: Checking For Stator-To-Impeller Interference
G92H15203Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals