LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Servicing - A/T) >> Adjustments >> Shift Cable/Linkage

Shift Cable/Linkage

WARNING: This page is about a different variant/trim than selected.
  1. Position transmission shift lever in Overdrive position. Hold shift lever against rear overdrive stop with a constant force of about 3 lbs. (1.4 kg). Loosen shift control cable retaining nut at transmission. Ensure transmission/transaxle manual lever is in Overdrive position. Overdrive is second detent from rear most position.
  2. Tighten shift control cable retaining nut to 13-17 ft. lbs. (17-23 N.m). Check transmission operation in each position. Ensure neutral start switch and back-up lights operate properly.
scientia non olet · About LEMON Manuals