LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Tests W/Codes - EEC-IV (5.0L)) >> Additional System Functions >> Trips & Drive Cycles >> Malfunction Indicator Lamp Function

Malfunction Indicator Lamp Function

WARNING: This page is about a different variant/trim than selected.

Drive cycles and trips are used by OBD-II software strategy to control Malfunction Indicator Lamp (MIL) off function. MIL is illuminated whenever a DTC is stored in memory. MIL is turned off after 3 consecutive drive cycles or trips are completed, without identical fault being present. Number of drive cycles or trips, varies with each system monitor. See appropriate test in this section.

scientia non olet · About LEMON Manuals