Removal & Installation
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1994 Mercury Tracer, 1994 Mercury Topaz, 1994 Mercury Sable, 1994 Mercury Grand Marquis, and 1994 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
Remove fuel rail from intake manifold. See FUEL RAILS. On all models except 2.5L, remove fuel injectors from fuel rail by rocking injectors while pulling injector from fuel rail. On 2.5L, disassemble fuel rail and pull injectors from fuel rail. On all models, lubricate new "O" rings with clean engine oil. Install new "O" rings on injectors. Inspect injector "plastic hat" (covering the injector pintle) and washer for deterioration. Replace as necessary.