LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Explorer 4D Utility, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Heater System) >> Testing >> Blower Switch

Blower Switch

WARNING: This page is about a different car, the 1995 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Unplug connector on blower switch. Using a DVOM or self-powered test light, check for continuity at specified wire terminals. See appropriate BLOWER MOTOR SWITCH TEST  table. If continuity is not as specified, replace blower switch.

BLOWER MOTOR SWITCH TEST

Speed & Wire Terminals (1)Circuit Continuity
OFF 
Red/Orange Wire Open
Yellow/Red Wire Open
Light Green/White Wire Open
Orange/Black Wire Open
Low 
Red/Orange Wire Closed
Yellow/Red Wire Open
Light Green/White Wire Open
Orange/Black Wire Open
Medium-Low 
Red/Orange Wire Open
Yellow/Red Wire Open
Light Green/White Wire Closed
Orange/Black Wire Open
Medium-High 
Red/Orange Wire (2)Open
Yellow/Red Wire Closed
Light Green/White Wire Open
Orange/Black Wire Open
High 
Red/Orange Wire (2)Open
Yellow/Red Wire (2)Open
Light Green/White Wire (2)Open
Orange/Black Wire Closed
(1) Measured between Dark Blue/White wire and specified wire.

(2) May also have continuity to Dark Blue/White wire in this switch position.