Lower Control Arm: Installation
- Install NEW mounting bolt bushing if necessary. Position stabilizer bar washer and bushing onto stabilizer bar. Position lower control arm over stabilizer bar. Raise lower control arm inner end into pivot bracket. Finger-tighten bolt to hold it in place. Position ball joint stud into knuckle bore. Install ball joint bolt and nut.
- Install stabilizer bar bushing, washer and nut. Tighten to specification. See TORQUE SPECIFICATIONS . Install NEW cotter pin. Tighten lower arm-to-chassis bolt to specification. Tighten ball joint nut to specification. Install wheel and tire. Lower vehicle.