LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Aspire Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starting System - Starter >> Bench Testing >> Brush & Spring Test

Brush & Spring Test

  1. Connect ohmmeter between positive brush holder and negative brush holder. If ohmmeter indicates continuity, replace brush holder assembly.
  2. Measure brush length. See the STARTER MOTOR SPECIFICATIONS  table. If brush length is less than specification, replace brushes.
  3. Measure spring tension. Spring tension should be 2.2-4.3 lbs. (1-2 kg). Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals