LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Aerostar Van Window, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Testing >> Pressure Test >> Pre-Test Preparation

Pre-Test Preparation

  1. With belt tension correct, disconnect power steering pump pressure hose. Keep hose end raised to prevent fluid loss. Connect pressure hose of Power Steering Analyzer (D79L-33610-A) to power steering pump fitting. Connect other hose from valve side of analyzer to steering gear inlet.
  2. Open valve on power steering analyzer. Run engine until fluid reaches normal operating temperature of 165-175°F (74-79°C). Check fluid level. Add fluid as necessary.
scientia non olet · About LEMON Manuals