LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Cruise Control System - 2.0L A/T) >> Adjustments >> Servo Linkage

Servo Linkage

WARNING: This page is about a different variant/trim than selected.

Remove cable retaining clip from cable adjuster. Ensure throttle is fully closed. Pull servo cable to take up any slack. Loosen at least one notch so there is approximately .12" (3 mm) of slack in cable. Insert cable retaining clip and snap into place.

scientia non olet · About LEMON Manuals