Removal (3.8L SC)
- Using Spanner (T89P-6634-A), disconnect inlet tube from supercharger. See Figure. Disconnect outlet tube at charge air cooler. Remove nuts attaching inlet tube to charge air cooler.
- Remove nuts retaining charge air cooler inlet tube to charge air cooler. Remove nuts attaching inlet tube to alternator/power steering pump bracket. Remove stud from alternator/power steering pump bracket during inlet tube removal (if necessary). Carefully remove inlet tube to avoid damaging sealing surfaces.
CAUTION:
When installing inlet tube, tube must be tightened using proper procedure to provide correct sealing of all surfaces.