LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Window Switches >> Coupe Single Switch

Coupe Single Switch

  1. Remove switch from vehicle and test with a self-powered test light or ohmmeter. With switch in NEUTRAL position, check for continuity between terminals No. 1 and 2, and No. 3 and 4. Terminal No. 5 should be disconnected from all other terminals. See Fig 1 .
  2. With switch in UP position, continuity should be present between terminals No. 1 and 5, and No. 3 and 4. Terminal No. 2 should be disconnected from all other terminals.
  3. With switch in DOWN position, continuity should be present between terminals No. 1 and 2, and No. 4 and 5. Terminal No. 3 should be disconnected from all other terminals. If switch fails any of these tests, replace switch.
Fig 1: Identifying Single Switch Terminals (Coupe)
G94B33820Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals