Service Code Reference Charts
NOTE:
In addition to transmission fault codes, engine-related fault codes may be output during QUICK TEST
procedure. These fault codes pertain to engine performance and must be repaired first as engine performance will greatly affect transmission operation. For information and testing procedures of engine-related fault codes and components, see the appropriate TESTS W/CODES
article in the ENGINE PERFORMANCE section.
CODE REFERENCE CHART
| Fault Code | Code Definition | Circuit Test | |||
|---|---|---|---|---|---|
| KOEO Codes | |||||
| 111 | Pass Code | N/A | |||
| 116 | ECT Voltage High/Low | DA1 | |||
| 117 | ECT Voltage Low | DA20 | |||
| 118 | ECT Voltage High | DA10 | |||
| 121 | TPS Voltage High/Low | DH2 | |||
| 122 | TPS Malfunction | DH10 | |||
| 123 | TPS Malfunction | DH3 | |||
| 511 | Replace PCM | ***** | |||
| 513 | Replace PCM | ***** | |||
| 566 | 3/4 Solenoid Malfunction | A1 | |||
| 629 | TCC Circuit Failure | C1 | |||
| Continuous Memory Codes | |||||
| 111 | Pass Code | N/A | |||
| 118 | ECT Voltage High | DA90 | |||
| 121 | TPS Voltage High/Low | G1 | |||
| 122 | TPS Malfunction | DH94 | |||
| 123 | TPS Malfunction | DH90 | |||
| 124 | TPS Malfunction | G1 | |||
| 125 | TPS Malfunction | G1 | |||
| 452 | Insufficient VSS Input | (1) DP1 | |||
| 511 | Replace PCM | ***** | |||
| 513 | Replace PCM | ***** | |||
| 536 | BOO Switch Malfunction | FD90 | |||
| 629 | TCC Circuit Failure | C1 | |||
| KOER Codes | |||||
| 111 | Pass Code | N/A | |||
| 116 | ECT Voltage High/Low | DA1 | |||
| 121 | TPS Voltage High/Low | DH1 | |||
| 167 | TPS Malfunction | DH20 | |||
| 511 | Replace PCM | ***** | |||
| 513 | Replace PCM | ***** | |||
| 536 | BOO Switch Malfunction | FD1 | |||
|
|||||