LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Econoline E150, 5.8 H >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - E4OD >> Torque Converter >> Stator Interference Check >> Stator-To-Turbine Interference Check

Stator-To-Turbine Interference Check

  1. Place converter on bench, front side down. Install stator support to engage mating splines of stator support shaft.
  2. Install input shaft, engaging splines with turbine hub. While holding stator shaft stationary, rotate turbine with input shaft.
  3. Turbine should rotate freely in both directions without interference or noise. If interference or noise exists, stator front thrust washer may be worn and converter should be replaced.
NOTE: Stator support may remain in pump assembly during check.
scientia non olet · About LEMON Manuals