Wiper/Washer Switch Test
WARNING: This page is about a different car, the 1994 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
- Unplug connector from rear wiper switch. With switch in ON position, continuity should exist between terminals for Black/Blue and Black wires. Continuity should not exist with switch in OFF position. Replace switch if continuity is not as specified.
- Unplug connector from rear washer switch. With switch in ON position, continuity should exist between terminals for Blue/Yellow and Black wires. Continuity should not exist with switch in OFF position. Replace switch if continuity is not as specified.