LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Crown Victoria Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> BRAKELINES >> Conventional Bleeding

Conventional Bleeding

  1. Remove dust cap from right rear wheel bleeder fitting. Connect hose to bleeder fitting. Submerge other end of hose in container of clean brake fluid.
  2. Loosen bleeder fitting while an assistant presses brake pedal through its full travel. Close bleeder fitting. Wait 5 seconds. Repeat until air bubbles are no longer present at submerged end of hose.
  3. Repeat procedure at left front, left rear and right front wheels. Refill reservoir after each wheel is bled. When complete, adjust fluid level to .16" (4.1 mm) below MAX line.
scientia non olet · About LEMON Manuals