Front Wiper/Washer Switch Test
Remove steering column cover. Unplug wiper/washer switch. Test for continuity between specified terminals with wiper switch set to positions listed in table. See FRONT WIPER/WASHER SWITCH TEST table. See Fig 1 . Replace switch if continuity is not as specified.
FRONT WIPER/WASHER SWITCH TEST
| Position | Terminals |
|---|---|
| OFF | 1 - 5 |
| INT | 1 - 5 |
| LOW | 5 - 15 |
| HIGH | 4 - 15 |
| MIST | 4 -15 |
| WASH | 3 - 15 |