LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Aspire Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Tests >> Pinpoint Test C - Solenoid Valve

Pinpoint Test C - Solenoid Valve

  1. Inspect all wiring, brakelines, and other ABS components for visible physical deterioration or damage. If all is okay, go to next step. Make any necessary repairs.
  2. Turn ignition on. Measure voltage on Yellow/White wire at ABS control module, leaving connector attached to module. If battery voltage exists, go to next step. If battery voltage does not exist, repair Yellow/White wire between anti-lock relay and module.
  3. Turn ignition off. Unplug connector from ABS control module. Measure resistance between Yellow/White wire and the following wires: Yellow/Green wire (left front), Blue/Orange wire (right front), Brown wire (left rear), and Black/Yellow wire (right rear). If any measurement is not about 3 ohms, go to ANTI-LOCK ACTUATOR  under DIAGNOSIS. If measurements are as specified, go to PINPOINT TEST H  .
scientia non olet · About LEMON Manuals