Warning Chime

When the control module determines that the warning chime needs to be sounded, the audible chime output circuit (Pin No. 1) grounds the circuit, to sound the chime. Conditions that cause the chime to sound for 5 seconds are as follows:

• Ignition key is in the ON position (Voltage to Pin No. 25)
• Either shoulder belt is spooled in (Pin No. 14 or 15 is open/not grounded).

If the chime output has been triggered and timed out (sounded for 5 seconds), it can be reactivated by spooling in the other shoulder belt (Pin No. 14 or 15 open/not grounded).