LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Anti-Lock Brake System) >> Pinpoint Tests >> Pinpoint Test MMR-5 >> Motor Resistance Check

Motor Resistance Check

WARNING: This page is about a different car, the 1994 Mercury Tracer, 1994 Ford Probe, and 1994 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Disconnect hydraulic actuator assembly 2-pin connector from motor. Set DVOM on 200-ohm scale. Measure resistance between terminals on motor connector. If resistance is less than one ohm, go to PINPOINT TEST MMR-6  . If resistance is more than one ohm, replace hydraulic actuator assembly.

scientia non olet · About LEMON Manuals