LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation (2.3L, 3.8L SC & 5.0L)

Removal & Installation (2.3L, 3.8L SC & 5.0L)

  1. Disconnect air cleaner outlet tube from throttle body. Disconnect throttle position sensor and idle air control valve connectors. Disconnect throttle cables and speed control cable (if equipped). Remove throttle body bolts. Remove throttle body and gasket.
  2. Clean and inspect gasket mating surfaces. Install new throttle body gasket. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS.
scientia non olet · About LEMON Manuals