LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> F-Super Duty 7.3 M, Automatic >> Repair and Diagnosis >> Steering >> Steering System - BENDIX Power Steering >> Testing >> Pump Flow Rate Test

Pump Flow Rate Test

  1. Install Power Steering Analyzer (014-00230). See Figure . Allow power steering fluid to cool to 130°F (55°C). With engine at full governed RPM, close shutoff valve. Flow should read zero. Quickly open shutoff valve; flow rate should immediately return to normal.
  2. Repeat this test once, but DO NOT  allow fluid temperature to exceed 200°F (93°C). If flow rate does not immediately return to normal, repair or replace pump.
scientia non olet · About LEMON Manuals