LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Locking Hubs >> Testing >> Electronic Shift Transfer Case >> Control Module Self-Test

Control Module Self-Test

  1. To perform electronic control module self-test, remove the 5-wire connector and the 8-wire connector from the module. Turn ignition switch to "RUN" position.
  2. Activate the self-test switch and note result. A flashing indicator light indicates control module is okay. A steady indicator light indicates control module is inoperative and must be replaced.
scientia non olet · About LEMON Manuals