LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1993 >> Explorer 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A4LD >> Component Disassembly & Reassembly >> Low-Reverse One-Way Clutch >> Disassembly & Reassembly

Disassembly & Reassembly

  1. Using a screwdriver, remove snap ring. Mark and lift out one-way clutch with springs and roller bearings as an assembly. Replace assembly if found defective. See related components under CLEANING & INSPECTION  .
  2. To reassemble, insert one-way clutch with springs. Using a screwdriver, separate springs and install roller bearings one at a time. Install snap ring. Ensure one-way clutch is installed properly as marked during disassembly.
scientia non olet · About LEMON Manuals