LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Probe LX, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Electronic Suspension >> Suspension - Programmed Ride Control >> Self-Diagnostics >> Pinpoint Test Q2 >> PRC Control Module Power

PRC Control Module Power

Disconnect PRC control module connector. Turn ignition on. Set VOM on 20-volt scale. Measure voltage between Black/Yellow wire and ground. If voltage reading is greater than 10 volts, proceed to PINPOINT TEST Q3. If voltage reading is 10 volts or less, check 15-amp fuse or repair Black/Yellow wire between PRC control module and interior fuse box.

scientia non olet · About LEMON Manuals