LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Adjustments >> Rear Window Mechanism (Explorer)

Rear Window Mechanism (Explorer)

  1. Remove door trim panel and watershield. See DOOR TRIM PANEL  in REMOVAL & INSTALLATION.
  2. Loosen, but do not remove, upper regulator attachment nuts.
  3. Raise the glass to full up position and tighten nuts. See TORQUE SPECIFICATIONS  .
  4. Loosen, but do not remove, front glass retainer bolt.
  5. Lower glass to full down position and tighten retainer bolt. See TORQUE SPECIFICATIONS  .
NOTE: On Explorer with rear door cable-drive window regulator cable, when servicing the door glass system, window regulator or window regulator drive assembly (motor), the tension on the window regulator cable must not be altered. The proper cable tension has been pre-set at the production plant to insure correct function of the window regulator through the total life of the unit. Improper cable adjustment may result in premature window regulator failure or erratic window operation.
scientia non olet · About LEMON Manuals