Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Center Support Fluid Feed Bolts | 8-12 (11-16) |
| Connector-To-Case Cooler Line Nut | 18-23 (24-31) |
| Control Assembly-To-Pump Body Bolts | 18-23 (24-31) |
| Converter Drain Plug | 18-20 (24-27) |
| Extension Housing-To-Case Bolts | 20-29 (27-39) |
| Inner One-Way Clutch Race-To-Case Bolts | 18-25 (24-34) |
| Inner & Outer Lever-To-Manual Control Shift Nut | 30-40 (41-54) |
| Manual Detent Lever Nut | 30-40 (41-54) |
| Oil Pan-To-Case Bolts | 10-12 (14-16) |
| Oil Pump Body-To-Case Bolts | 18-23 (24-31) |
| Parking Pawl Abutment-To-Case Bolts | 16-20 (22-27) |
| Parking Rod Guide Plate-To-Case Bolts | 16-20 (22-27) |
| INCH Lbs. (N.m) | |
| Center Support-To-Hub Bolts | 80-120 (9-14) |
| Lower Body-To-Main Body Bolts | 80-100 (9-11) |
| Main Accumulator And Solenoid Body-To-Case Bolts | 80-100 (9-11) |
| Main And Lower Body-To-Case Bolts | 80-100 (9-11) |
| MLP Sensor-To-Case Bolts | 55-75 (6-8) |
| Overdrive Cylinder Fluid Feed Bolts | 72-120 (8-14) |
| Plug Line Pressure Case | 72-144 (8-16) |
| Plug Throttle Pressure Case | 72-144 (8-16) |
| Positive Detent Spring-To-Case Bolts | 80-100 (9-11) |
| Reinforcing Plate-To-Case Bolts | 80-100 (9-11) |
| Solenoid Body-To-Case Bolts | 80-100 (9-11) |
| Stator Support-To-Pump Body Bolts | 80-100 (9-11) |
| Valve Body-To-Case Long Stud | 80-100 (9-11) |
| Valve Body-To-Case Nut | 80-100 (9-11) |
| Valve Body-To-Case Short Stud | 80-100 (9-11) |