Line Pressure Test
- Connect a 0-300 psi (0-21.1 kg/cm(2)) pressure gauge to line pressure tap on left side of transmission case just forward of control levers. See Fig 1.
- With engine at normal operating temperature, apply parking and service brakes. Check line pressure in all ranges. Pressure should be approximately as specified. See LINE PRESSURE SPECIFICATIONS .
LINE PRESSURE SPECIFICATIONS
| Gear | psi (kg/cm2 ) @ Idle | psi (kg/cm2 ) @ WOT Stall |
|---|---|---|
| "P", "N" | 55-65 (3.87-4.57) | N/A |
| "R" | 75-99 (5.27-6.96) | 240-265 (16.87-18.63) |
| O/D, 2 | 55-65 (3.87-4.57) | 156-174 (10.97-12.23) |
| 1 | 75-99 (5.27-6.96) | 157-182 (11.04-12.80) |