LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Bronco 5.8 H >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - E40D >> Component Disassembly & Reassembly >> Pump Assembly >> Reassembly

Pump Assembly: Reassembly

  1. Install main regulator valve. Apply pressure to booster sleeve and install internal retainer ring. Install converter shift and regulator valves. Lightly coat gerotor gears with transmission fluid and install in pump housing. Dot on inner gerotor gear faces control body.
  2. Lower control body and stator into pump body. Align 28-mm round holes in control body and pump body.
  3. Install 11 pump body bolts. Using Banding Tool (D89L-77000-A), align input shaft bushings to converter hub bushings. Tighten retaining bolts to specification. See TORQUE SPECIFICATIONS . Remove banding tool. Ensure outer edges of control body and pump body are completely aligned.
  4. Install converter clutch lock-up seal on nose of stator support. Install coast clutch seal and converter lock-up seal on stator support. Install pump outer diameter seal. Lubricate seal with transmission fluid before installing pump into case.
scientia non olet · About LEMON Manuals