KICKDOWN Cable Adjustments: 4EAT
- Remove splash shield near left front tire. Remove square head plug from pressure port marked "L" and attach transmission oil pressure gauge to pressure port. See Fig 1
.
- Turn kickdown cable lock nuts to farthest point away from throttle cam (loosen cable all the way). See Fig 1
. Start engine and warm to operating temperature. Engine should idle between 700-800 RPM in with transmission gear Park.
- With engine at idle, turn lock nuts toward throttle cam until line pressure exceeds 63-66 psi (435-455 kPa). Turn lock nuts away from throttle cam until line pressure stabilizes at 63-66 psi (435-455 kPa). Tighten lock nuts and turn engine off.
- Remove oil pressure gauge. Install square head plug and tighten to 43-87 INCH lbs. (5-10 N.m). Road test vehicle.
Courtesy of FORD MOTOR CO.